More Eco-Printing

 I am addicted.

I could not resist trying these eucalyptus leaves, leftovers from arrangements at church on Sunday.

I've learned that dogwood leaves from my yard are predictably good prints.

Here is the first layer of leaves, a combination placed on a length of cotton canvas that I've used previously.

Next is the layer of blank watercolor paper.

Here's my second layer of leaves. There will be a different set of prints on both sides of the paper. It is sturdy enough to resist bleed through from the leaves. I had trouble identifying the *right* and *wrong* sides of the eucalyptus, so I just ignored that aspect of the process. Note that this new layer of leaves means that the paper is in contact on both sides of the paper.

After one more layer of cloth (cotton muslin that has been used in previous prints), it is rolled tightly around a dowel and secured with cotton twill tape.

Then it's squeezed into the pot for some time simmering. 

It cannot be submerged completely in this pot so I'm on the look-out for a larger pot from the thrift shop.

The next day, I enjoyed the big reveal - some pretty prints on the cotton canvas.

After the paper has dried completely, it is fun to see the difference in the dogwood leaves and the eucalyptus leaves.

And here is the other side of those watercolor papers. I am enchanted - bookbinding is next!

O'Keefe Coatdress

When this pattern from Diane Ericson was published, I ordered it right away. I have decided that, even if I never use the actual pattern pieces, it's worth the price for all the creative ideas Diane tucks into her pattern instructions. This comes in the form of a spiral bound booklet that is more like a magazine than pattern instructions anyway.

One of many of Diane's samples from this pattern - here it is cropped.

After having such great fun with her French Fold Shrug, I was hungry for another creative adventure with Diane as my muse. And I am somewhat enamored of Georgia O'Keefe. Who isn't? She was such a force of nature during her time, answering primarily to her inner (and outer?) spirit, and not worrying too much about others' opinion of her.

Since I almost never buy fabric for a specific project, I shopped stash for the perfect piece to try this pattern. First though I pulled out an old cotton bed sheet and made a sort-of toile, using the cropped length on the pattern pieces,. This was not to be a wearable toile/muslin.

Use of a toile or muslin has its limits. A bed sheet is usually constructed with a fairly tight weave. This piece is soft due to its age. But it does not mimic my fashion fabric adequately.  I rather liked the way the toile fit through the shoulders and bustline.

My fashion fabric was in stash but not deeply. I purchased it at Mulberry Silks and Fine Fabrics in NC in early June. It is one of those luscious Nani Iro double cloth gauze wonders. This one is on a soft black background with a light scattering of flowers and leaves. There is also some yummy brown, and even a little touch of shiny gold thread. Beautiful piece.

And of course I had too little fabric. To use what I had as fully as possible, I placed the pattern tissue on it strategically letting the long dress length hang beyond my fabric. This omitted the collar and cuffs which was fine. I had an older cotton lawn from Gail K here in Atlanta that would be good as an accent. The lawn has the same hand as the cotton gauze.

After I basted it all together, I decided the dropped shoulder was not a great look. It was too dropped and, with this soft fabric, there appeared to be no shape to the garment.

I had to cut the back with a center seam and forgot to add seam allowances. You can see where I added in a piece of selvedge with the sweet Nani Iro marks to fix my goof.

Trying to raise a dropped shoulder, after the fabric has been cut, is not for the faint of heart. It requires messing with the side seams and the shape of the armhole and the shape of the sleeve, lots of kludgy after-the-fact stuff. I played around with lapping the side seams as Diane is prone to do. It is a cool technique. 

I omitted interfacing from the collar, as well as the cuffs. I added interfacing to the center front only to support the buttons and buttonholes. I also used a mix of buttons, a la Diane.

I like the finished collar - it's soft like the overall garment. In the spirit of Diane, I folded in in some pleats in the back collar and visibly stitched it down. 

A Diane Ericson sleeve is beautiful. It is one piece but, with the addition of a dart, executes like a shaped two piece sleeve. My final garment does not show this off properly, perhaps again due to the soft fabric. I plan to revisit some patterns that fit me nicely and convert the sleeves so that they hang with this soft curve at the elbow.

One of the interesting aspects of the Diane Ericson sleeve is that it is easy to use when fabric is limited. See my layout above. The only sleeve seam falls along the grainline. The dart mimics an underarm seam.

The bottom of the toile sleeve, which follows the crosswise grain here, shows the effect of Diane's sleeve design.

I think I may do something different with the cuffs. The softness does not work as well there as it does on the collar.

In the end, I sewed ordinary side seams down for about 6" and left the remainder open as a vent. The sleeves were attached in the round and look OK.

Here is the final piece, though Diane recommends that no garment need ever be final. That's a philosophy that resonates with me. Those cuffs are going to change, for sure. 

For now, it is OK.

Hana Fukin

I started to title this One and Done. But now that I'm finished with my first (!) one, I don't know. Maybe I need one in my sewing box to keep me happy centered while watching the news.

How it started - washaway dots were printed on 1/2 of the length of cotton

Hana Fukin means Kitchen Cloth or Flower Cloth. It is a form of sashiko that I had not tried. It looks complex (to me) but is super simple - just the running stitch over and over again. Over and over and over again. Starting in different directions, and in different locations. Next time, I'll be a bit more deliberate. Oops! I said next time.

Finished and washed

According to the blog Zen Stitching, daughters from samurai families learned to sew Hana Fukin to acquire desirable mental attributes of perseverance and patience.

Certainly I am deficient in perseverance and patience. Or maybe I'm just too old to worry about desirable mental attributes any more. To be honest, I don't think I ever worried about it. But what a sweet idea.

Oh, and precision is a good idea, unlike my version of sashiko which is, shall we say, more free-spirited. At the end, as I usually do, I embraced my lack of precision and mine is random, or more precisely, full of mistakes. 

Almost finished!

I actually pulled some of it out as I made the mistakes. But then I decided, Nope. It is OK full of my mistakes. First off, I did not have and could not find very precise instructions - did I mention my lack of patience? I figured it out as I went along, and missed the mark a number of times. 

And now I like it. It feels nice and will feel nicer with use. 

It was fun to order the kit from Sashiko Lab in Japan. And it was fun to receive the little package. It came with a rectangular piece of navy blue (indigo?) cotton fabric containing a bit of starch. One half of it was lightly printed with white dots less than 1/4" apart. The dots guide the stitching and, depending on where you start and stop the running stitch, can produce an amazing array of designs.

First row of running stitches

The kit also contained the most lovely soft wonderful-to-stitch sashiko thread in medium brown. I'm so glad to have some remaining to use in other projects. I have since learned that Sashiko Lab also carries sashiko thread for left-handed stitchers. I guess it's twisted the other way???

There were also instructions in Japanese and a few tiny drawings of the beginning stitch order.

So maybe this is not one-and-done. Maybe I need to order another kit from Sashiko Lab when/if they become available again.